Signal Processing Group: The Analog ASIC and Analog Circuit Design Engineer's corner

Tutorial paper on CRC encoding for error control in data communication systems
Settling times of two stage CMOS operational amplifiers MATLAB m - files
1/f noise in MOSFETs with a noise model
Microstrip design in silicon using analytical expressions
LCR circuit conversions for design
Pitfalls of analog IC design
Low cost prototyping handbook
Development processs for analog and mixed signal ASICs
Event detector interface
A sample program plan for ASIC development
A low frequency analog front end
A fast current steering DAC design report
A CMOS voltage reference macroblock
Bonding wire current carrying capacity
Phase noise of PLL components
Microstrip design executable files
Multirate sampling in signal processing
Bonding wire current analysis
References for diode design
Clock distribution strategy in complex digital circuits
ADPLL design considerations for digital clocking
The harmonic balance algorithm
IP3 and other intercept points
ft and the forward transit time in a bipolar transistor
VSWR, reflecion coefficients, s11/s22 etc
Some FCC reference papers for unlicensed transmitters Part A.
Some FCC reference papers for unlicensed transmitters Part B
L - Section and transmission line matching in rf circuits
NEC2 analysis of an Inverted F antenna
Analysis and design of second order systems
Design of FIR filters
DMOS transistors
RMS Values
Cable modeling
Half IF
Clock driver
RF Power Amp design 1
RF Power Amp design 2
Thermal modeling
The role of the heatsink
Hogenauer filters
Integrating the sinc squared function for prbs power assessments
The eye diagram
Peaking current source
First order temperature independent resistors in analog and mixed signal IC design
First order filter attenuation and frequency parameter calculation algorithms
The MOS varactor: An introduction
Some useful identities for MOS IC design
Some basic design parameters for bipolar design
De-embedding the DUT in high frequency measurements
Conversion of lumped element LC filters to transmission line based equivalents
Calculating the Steinhart-Hart coefficients for thermistors
Ferrite beads: useful components
Path loss for rf signals in free space

Engineer's Corner